Bubles inside bubles is all universe - Gans and Two Ideas

We know WR science that putrefation creates a radiation, it cools, expands, spin out and dissolves.
So in my oppinion  Gans is actually a form to reach equilibrium and capture that changes inside the water by a insible micro-buble proccess, that gets trapped inside salty water..

Lets think a bit.

I noticed that when in 316l electrolisis (anomaly like gans) creates a mass made of hidrogen if the negative is barely touching the botton of water with a 316l needle tip inside water in electrolisis...

Because the bubles is so tiny, and the voltage enough, the micro bubles was forming a hidrogen preponderant, or magnetic, discharging mass., made out of discharging mass creation electrolisis.

But this same electrolisis when the positive was barely touching the surface, or from a hole in the botton,  touch the water just with the tip of a 316l needle electrode, would aslo create a discharging mass, but in relation to the latest one mass created, it would be ElectroPositve preponderant based on electro polarity and oxigen-hidrogen balance?

What happens if you join both?
I don't know. in my view is:
Both are in the same side of balance. Both are discharged gans, that eventually will dry and solidify in inner direction, becoming generoative.
* The genero-active processes in this ever expanding radiative universe-planet and solar system, are suddenly compensated by environment.

Is almost like to try to burn a torch inside a winter under -30 degrees celsius. Is pretty hard to do this in atmosphere, in contact with nitrogem. We know pretty well how much High voltage is necessary to joing particles of nitrogen in a NO3 of nitric acid. is around 10.000Volts+ to see some resulted nitric acid acumulated in days.

The discharge runs back trough atmosphere to reach its point of equilibrium. And the nitrogen joins the fun, creating tiny bubles of no3, or acid nitric gas.

But you forced a nitrogem that tends to separate violent, takign together any matter, as is used to melt silver, or gold with added chlorine strenght.

Ok....
Gans is almost like that high voltage electrical power but... why we dont see sparks?
We would see they spark if we produce them in a more aerial environment like metane gas, that according to the density will be liquid or gaseous, yet in this unnatural high pressure environment how much strenght is necessary to create such nano-bubles?

We could instead create in a waterfall made out of some form of gas... Noble gas anyone?
But how much you can spent in a ever flowing noble gas that is so expensive?
Well... hidrogen goes waaaay up...
How would you force hidrogen to goes down?
If you crate a exit on the side of a tube, (upside down cones), most o the hidrogem will go to its lateral.
If the less quantity of hidrogen is generated on the inner portion of the cone, how much hidrogen needs to be generated that, the push up created by ever flowing up trapped bubles of hidrogen necessary to suck the hidrogen bubles in the midle to go down the cone.
So if we force the hdirogem to go down the tip of the cone underwater, the particle of hidrogen will be flowing inside the hole where the butanno, or even salty water is, creating bubles that have micro bubles of hidrogen... But this is so tiny that would take years....
What exactly is porous enough, but dense enough to create such a effect?
Is just a reflexion, you probably are lost, but keep it up. It makes sense.
The wood is one of the known metals that have porosity...To air, and less to water.
But alluminum and iron have no porosity? Have!
aluminium and iron have porosity to heat my friend....
But...friend... heat comes from incandescence... why white light don't cross the aluminum?
Because aluminum in his liquid natural state in a environment where it acts like water, would let the light cross his structure.
But here is cold for aluminum and iron. Very cold... They are frozem.
The shining on the surface of the metals is actually the leidenfross effect made by light.
But the infra-red light can cross aluminum (heat from fire), because they are generative, and very active, coming from a expansion of a gas and compression of its secundary element into carbon.
The almost pure metane creates tiny particles of carbon and very subtle eletric heat or lifting magnetic expanded gas.
The equilibrium is kept. The expansion must follows together with compression on other side.
This creates fire. But the activity is so high that it became preponderantly radiative... so that the nature brings gravitative translation of fire to reach is equilibrium in atmosphere.

This will bring back to the point where, if we force hidrogem to create such bubles, the suddem explosion will happen as soon it breaks up the eggs created by the process.

Im tired now. Im loosing focus. I need rest.
gfcgamer