I have developed my own variation of cement cell.
After years I have found a old cell was still working.
This is called simply gfcgamer´s aluminum cristal cell:
For this kind of cell specific I use:
A cheap aluminum tube used in kitchen to keep aliments.
A tiny tube, or electrode of 316L Austenic Inox.
A source of power, can be 12V, 1 amp from cheap multi-voltage power souce.
Works well.
You will need a extra foil for create some capacitance.
If you can, take some strong neodimium for experimenting with water circulation.
1 - Put the electrode inside the cheap aluminum foil tube, loosy, dont worry just dont let touch the any outer aluminum foil, but it can touch well the inner paper tube if is not to much aluminum salt in there.
2 - Take out 60cm foil aluminum for later aluminum cell.
3 - Place 3 or more simple foil around the aluminum tube and cover it with the aluminum above.
4 - immerse the rest (almost 7 metters) aluminum tube inside, underwater It will float a bit in the begin.
5 - let it run for some minutes, with with any source of power from 12 volt to 30 volt or more,
the positive (oxidizer or anode) in the 316l electrode and the negative on outermost foil.
6 - Experimental Step - If you have neodimium use as much possible around the aluminum tube generator. this will create a circulating water spiral all around the neodimium, inside the aluminun foils that have acumulated some aluminum salt. But this is step is not obrigatory for this case, but much experimental
7 - Now running for a while, we can turn the positive back to 316l, and change now the outside water where it have been imersed.
8 - Let it run like that for 1 hour.
Check the voltage today, and the day after. You will see a 1,5 to almost 3 volts and it will continue produce a tiny bit gas even after turned off.
If you want a huge effect.
- Choose a place where the water umidify, it can be even tiles from badron, but let the water fall around them to go underground.
As this salt is going underground, let a cotton tread soaking the ground just a bit.
After some hours the water will flow all down, now take the negative and put on the ground just under the cell.
Let the tiny cotton tread keeping the ground moist.
This will make a huge electrode of underground earth. Cement ground is the best yet.
Let the positive on the cell, and ground the negative in the cotton tread.
I think the cell wil generate from 1.5 volt to much more if well water grounded.
Sometime before I remenber he was generating so much voltage that was bubling intensively.
That time I was without voltage mesure device.
You will not that the aluminum will have holes all the way. this means, we have somethign happening there!
After years I have found a old cell was still working.
This is called simply gfcgamer´s aluminum cristal cell:
For this kind of cell specific I use:
A cheap aluminum tube used in kitchen to keep aliments.
A tiny tube, or electrode of 316L Austenic Inox.
A source of power, can be 12V, 1 amp from cheap multi-voltage power souce.
Works well.
You will need a extra foil for create some capacitance.
If you can, take some strong neodimium for experimenting with water circulation.
1 - Put the electrode inside the cheap aluminum foil tube, loosy, dont worry just dont let touch the any outer aluminum foil, but it can touch well the inner paper tube if is not to much aluminum salt in there.
2 - Take out 60cm foil aluminum for later aluminum cell.
3 - Place 3 or more simple foil around the aluminum tube and cover it with the aluminum above.
4 - immerse the rest (almost 7 metters) aluminum tube inside, underwater It will float a bit in the begin.
5 - let it run for some minutes, with with any source of power from 12 volt to 30 volt or more,
the positive (oxidizer or anode) in the 316l electrode and the negative on outermost foil.
6 - Experimental Step - If you have neodimium use as much possible around the aluminum tube generator. this will create a circulating water spiral all around the neodimium, inside the aluminun foils that have acumulated some aluminum salt. But this is step is not obrigatory for this case, but much experimental
7 - Now running for a while, we can turn the positive back to 316l, and change now the outside water where it have been imersed.
8 - Let it run like that for 1 hour.
Check the voltage today, and the day after. You will see a 1,5 to almost 3 volts and it will continue produce a tiny bit gas even after turned off.
If you want a huge effect.
- Choose a place where the water umidify, it can be even tiles from badron, but let the water fall around them to go underground.
As this salt is going underground, let a cotton tread soaking the ground just a bit.
After some hours the water will flow all down, now take the negative and put on the ground just under the cell.
Let the tiny cotton tread keeping the ground moist.
This will make a huge electrode of underground earth. Cement ground is the best yet.
Let the positive on the cell, and ground the negative in the cotton tread.
I think the cell wil generate from 1.5 volt to much more if well water grounded.
Sometime before I remenber he was generating so much voltage that was bubling intensively.
That time I was without voltage mesure device.
You will not that the aluminum will have holes all the way. this means, we have somethign happening there!
