Sunday, October 07, 2012

Neutral Plates - Vibratory Obstacle

As we see now,  in video:
The obstacle blocks the flow from one side (top, expanded air, water ,matter, solids)to other (space, vacuum,  generated by weight of water into tubes)

Inside a lamp we have the same, A flow of energy that could Burn instanstaneously, is limited by vacuum.
The only particles that can enter in and out find obstacle (glass).

I want to reach something here, dont fraight with wrong details.

The darkness so doesnt sudden destroy the incandescent light metal in a FLASH, but cross trough glasses, the obstacle that generate excitement of the photons inside the lamp, exactly as cup on video above.

1- incandescent metal fire genrate vaccum (attracts dark, expanded matter that swap places with air after the flash, burning oxigen and completing a process.)
2 - The limited by glass, there  is no way to this happen, so there also no oxigen to burn it inside the lamp. As the oxigen can´t cross the glass, what come after the metal is the lightest particles.
As they try to cross the glass inside vacuum, as the vacum sucks the solid cup down puxing water to fill the vacum, the glass saturates in his surface and block the sudden flow of energy, as the cup sometimes is puxed down, even being lighter than water, blocking the flow and doing a single vabration section.
What we see is the finest dark particles transforming into light. Because if metal turn into light, some light must turn into dark. The light so happens, as if we have oil over the water, also we can use noble gases to create colorfull lights inside lamps..
In the Video Above, the charge is answering like the water inside joe cell shows bubles of hidrogen going left and right by such influence.
 But if we could limit this vibration, to take time, crossing under neutral plates that even excite him even more vibrations, there will be a slowdown effec. As we turn off the device it would take some time to finish his now charge.

Explanation on Bubles.
Bubles are basically like this:

As in the lamp:
The oxigen find a vacuum created by a expansion, so the air cannot run against water, in my view, the oxigen and hidrogen ions, cross down and take place pressing down all oxigem and hidrogem in the cell, until some fine hidrogem entering the water, is also released in the point where the vacum was created over the electrode, and oxigem takes place where expansion try to take place. 

If we forcibly expose 316l to the salty water acts like a oxigem medium, where releases the oxide from the metal destroing the cell, and accelerating the short, destroing hho generator properties.

I will set knowledge much more easy to understand soom, but I need this now.

"A OXIGEN  THAT COULD OXIDIZE METAL, BURNING INSTANTANEOUSLY, IS LIMITED BY WATER AS VACUM IN A LAMP."
"ONLY THE FINEST ENERGY COMING OUT OF ELECTROLDES REACH SLWOLY THE ELECTRODES UNDER WATER. (THEY EXPAND OR COMPRESS IN exchanging  PAIRS) 
But estrange, they cannot work in air, but only in pure generated vacum.
The pure water has more vaccum or space, than salty water that have metal oxides or solids that could act as center, burning the bubles, creating a slow burning fire, know as simple hidroxide, where there is no charge at all..
The bubles are for me formed by vacum limiting water that forces a vibration of oxigen and hidrogem particles to let the energy flow out, and so is created by this obstacle like in first video, a vibration that could even generate electricity, as generate bubles that scape from generator.


Im sleeping, Someday I will make myself perfect clear, believe me.

gfcgamer

No comments: