E.L.S.A. The forbidden forgotten project

ELSA was a very good project. They displace water in a submarine like device that goes up.
Consideration was on how much water a submarine lifts while is coming to the surface.
Not much but sufficient to keep a moto continuous.

My attention here is that he uses a Single pistion.
My observations say that we could use not only many pistons to keep two pressure/vacum atmospheres but also use expansion agains conical walls that will force rings up when expanded and down when compressed.

If in my project we use rings instead of polyacrilamide balls, they would come up in conical tubes like a rocket!

Expansion in cones makes a elastic trow effect, where grip would just help this happening.
Many rings would keep the two atmospheres in check, just like a simulation of space-earth evironment, there willl be no energy necessary to create strongest ciclone like effects.

People must be blind, in middle ages to be able to be DOGMATIZATED by today´s  BAD science.

TWO ATMOSPHERES

This project is about the same as before. but something very very fun is here.

As the polyacrilamide expands inside tubes, they come up again and again.
the expansion make them ladder.

(we also could explore the expansion over a low angle cone, that woudl force them to be expeled up by strong directed pressure.)
(Remenber that crossing expansion compression is a limit creator, creates a wall of crossing lines)

What is much more fantastic over these, is there this bubles could keep vacuum.

As expansion happens over tubes, their direction would be up. Against gravity.
IF they expand inside a tube the vacuum will not  mix out from the top portion to the botton.


(rubber rings with water chanels inside)
RINGS: - project on rings projected 2 constant different air pressures.
(remenber: Many space is like a solid  wall, as the time to cross will be much more than the  speed of matter in case.)
(also remenber: Very compact solid is like a multiplyer speed of light for matter expanded into vacum, because vacum find much less space to travel, just the reverse of above observations)

Rings woud contract over very high pressures, the intestines like outer organic polyacrilamide layer cone   would keep a vacum atmosphere separated from a high pressure atmosphere at base of cone.

As the rings feel the pressure, a compression takes place, they are forced up. (like inverted jacobs ladder)

As these rings flow into their axes, they are guided to the vacum.
The vacum pulls there are so many that the only top ring is influenced.
 As the ring come to the vacuum environment they turn upside down.
Now you ask, the ring was released from a inner presssure there is no way back without a outer influence or force.
Not really:

They now is guided to a neutral position, no pressur up or down, but fit well.
Something come into the game now.
The inner of ring is just fit. but as vacuum expands them, the outer surface now as a inverted low angle cone compress them in downward direction  against pressure escaping from vacuum.
As many rings are there, they dont mix the atmospheres.
The rings come down as:
1 - Ladder by expansion by vacum.




 inner cilinder make possible a upper pressure and under pressure also.
As the rings come out into ring pressure conical rooling, they come up
As they come up very fast, they woud fall onver tips of cones.
But now they begin to dry because of very huge vacum.

About Polyacrilamide expansion bubbles and water rings.

1 - Expansion of polyacrylamides in water absorption makes them push themselves up. The way is not about density, is much more like a  ladder - That way the bubbles could have lead or some very heavy material inside - going up against gravity.

Polyacrilamide can have maybe 1% other material mixed when dry.
Polyacrilamide can in better configuration, be around balls like a skin.

This skin could be made by injecting some metal particles inside a rubber state, almost dry polyacrilamide.

The objective here would be to have a dry skin that won´t brake, making a very dense matter to came up against gravity like a ladder.

We used to think that a gravity engine or perpetual motion can´t work with weigh only, but sure works if the weight comes up like a ladder by expanding state. This is how nature works as Walter Russel talks in his home course.
A ball that is composed of polyacrilamide mixed with inox tiny bubles (atoxic, heavy) making a composed sphere very weighty.

As polyacrilamide expands, they ladder up, to the point they overflow in a plane filter that wont let bigger bubbles come down.
When they dry to a sufficient tiny, they cross holes and fall under the "wet tube"   that by tiny holes wont let hidrated balls come out, but wont let also dehidrated ones waiting outside, because the balls have so much space between them.
A 1 centimeter hidrated ball can have much more than 10 tiny dry dehidrated ones, just under him beside his touching point at the base.
A very good design would have setions like a coral snake or bee fat ass.
That rings separated 3mm from each other would let easy tiny come in the wet hidrating tube.

A easy process would be a cone with tip inside water at the base of a closed tube, let
the tiny bubles come in and help expansion just from the place where they can be very fast hidrated.

Well if a buble comes in a dry place, the speed would be very compromised, like if we charge only one of 10 series of batteries, the charge from that only battery would be distributed. This would be very very bad for speed of charge.

For a battery work well as this kind of ladder batery, we would need recharge(hydrate) equally  every section that the tiny dry bubles come in.

"Intestines like" tube would allways hydrate them, but just in this experiment a single cone under would be sufiicient.
A regulated flow of balls that fall under the cone is sudden rehidrated, and them come up again, but wont be able to came out from the tube, as the holes is already too tiny in the section from cone.


Dry balls is somewhat related to water vapour or evaporated particles, or even hho.
Water is another state.

In gaseous state, that kind of movement that happens here in very slow motion, can hapen very sudden in fire, gas or liquid states, what would explain the workings of nature.

I wonder if that sistem is not crossing against each other in the case of a incandescent charcoal in a  candle. As air comes in into compressing the charcoal, there is a simultaneous expansion that would filter like I SAID above.

A filter generated by two oposing forces would create a visible flame limits.

Whem we have 2 oposing forces as expansion and compression we have fire.
Studies on Gasefier inner flames woul make it easy to understand.

Ritmic Balanced Interchange.


























what about create some simulating polyacrilamide rings?

Finally I can understand the process of heating in relation to Dr Joe Champion Yeast Putrefation.

In my experiment the Putrefation let the silver atomic surface became quite gold. Pure gold.
This stable color will turn back into silverly if you let the sample a month after reach putrefation.

Why? Answer: THE HEAT DIRECTION.


Viktor Schauberger explained that what can curea man  is water going into 37 degrees direction (the human temperature) from cold or from heat.
That could explain why heat and could is both used sucessfuly fur cure acceleration.

Now Yeast:
Yeast is the same:

Fermentation is equilibrium turning hot, or charging with life energy.
Putrefation is heating discharging turning could again, death, loosing life energy.

When this putrefation is over, there is more equilibrium - nothing happens anymore.


What matters is the direction of heat.
We know well that when we heat a metal it will melt, and will not boil if we aply the same heat after gets could again, but will be kept melted if we aply the heat before it cools down.
Taking that in consideration,for putrefation affect keep charging the silver, we need many fermentations to keep silver only under putrefation influence, or the process will fail.

Why you got this?

Is simple in middle ages there is no way to heat something and keep it at the same temperature.
Do your really think they used thermostat?

It could be made by many layers of water, but also more natural is that a candle would heat something to boil, and after the heat is cooling to almost at 45 degrees, the yesterday water would be almost could, - time to change water up.

This would keep the heat being transfered all the way from mid could (45 degrees Celsius) into the transmutation salts, or else the process of coagulation would be broken!

Also the cooling and heating could be used in the known process solvet et coagula.

SOLVET et coagula  => for reaching a dissolution
or
solvet et COAGULA => for reaching coagulation.

A huge solvet in relation to coagulation time would create a difference.
For example, making something coagulate, we would need to charge this with some heat discharging from hot into could.
For making some matter solve, we would need to be heating the matter up to incandescence and place into the water (need strong glasses) , or let it cools down into wind.

There allways 4 factors to take into consideration.
Heat from Matter transfers into could medium. Direction out, solve, death, expansion.
Heat from Out ransfering to matter.  Direction in, coagula, charge, life, compression.
Could from Out, cooling down the matter, direction in, could being inflicted, dischargin.
Heat from In, transfering to Out, etc.. these terms i need review carefullly

Today is the day, I have made a effect of polyacrilamide going up into a tube and coming back again, let it dry before can go into the holes, also,in this filtered size evaporated, he can enter down there, just on the side of hidrated balls to push them up again.

gfcgamer

This can be used for greeb fresnel crossing lines.

http://www.youtube.com/watch?v=ThvYt11z_rs&feature=fvwrel

This is what i was searching for - chap conductive ink
http://comunidade.bemsimples.com/tecnologia/w/tecnologia/TINTA-CONDUTIVA.asp

now im ready to create many flat coils tha well regulated can even create electricity from light.
Coil works electrically on optical-like effects like these.
http://www.youtube.com/watch?v=W-eYOOTLdSQ&feature=plcp

Firt:
How Nitrogen is so well mixed with oxigen and hidrogen? Taking into consideration, being lighter we would be breathing only nitrogen!

But I thing we have earth rotation, moist, and evaporation that makes tiny bubles of oxigen and hidrogen  inside the nitrogen. (what they call ions) because ions is a big flaw.

Seek more knowledge on complete Walter Russel Home Course available in some places.

These "eggs" of nitrogen covered with oxigen or something like that, would make so easy to breath when I turn on the HHO or Joe-Cell in my room!

If so, a stuck air would have to much nitrogen, visible build up of them into potassium nitrates generated in urinated wood in the basement for centuries.


We also need to put here
Experiment: Create a Cell made of Neutral Plates into Lemon or Potatoes.
This will work as cell and we will see something?
How much voltage the neutral plates will generate?
The cell can be charged? How much energy the potato will generate?

This is for later, now we need concentrate on order of place at home.

gfcgamer

Hidrogen or Oxigen Implosive Charge Influence - Why not AIR?

Hidrogen or oxigen generated by the Stainless Steel  ANSI 316l Metal plates cell will have "Strange" Behaviours"  while connected to a DC battery or capacitive charge in Pure or Distilled Water wihtout any electrolite or salt, and away from ferromagnetic material or any magnets:


1 - The spark or fire will burn the buble of gas, the result will be no fire, and the instantaneous  generation of  vacuum.

2 - Any contact: I SAID ANY CONTACT with Nitrogen that makes 70% of our air will stop this anomaly! The effect will be null and a slow hidrogen or oxigen flame will be visible.


Taking these into consideration we understand that for a vehicle work on joe-cell, the Nitrogen of the air maybe is filtered out before it reaches the chamber.

As the cell is a Huge Super Capacitor-like device, the sparks would create  a filter.
ALSO.
IF there is no spark, but could balance, as any good mecanics know a good balanced combustion engine freeze the intake while is working well. This will freeze the nitrogen, and there will be no problem related with nitrogen.
Also could be related to the heat generated by enigne. If the oxigen or hidrogen being light generated by air evaporetes to the camber before the nitrogem, there is the answer.
Another possibility is the nitrogem can be also charged to don´t interfere with gas anomaly.

4 possible categorized factors for Nitrogem filtration:

1 - Spark that turns Nitrogen from air into liquid nitrogen smoke.
2 - Frreezing nitrogen into liquid.  (possible but very could, very hard to achieve)
Nitrogen: -210.00 °C, -346.00 °F
Oxigen:   -218.79 °C, -361.82 °F
Hydrogen -259.14 °C, -434.45 °F
We could filter the nitrogen out  in a "nitrogen surrounded metal" that let the air in.
This would let only the oxigen and hidrogen flow upward into the charging combustion chamber.

3 - Another method will be burning the hidrogem and oxigen out of nitrogen. That could explain why sparks separate nitrogem out of air, Nitrogem won´t burn..... Considerating this, a incandescent chamber would take air inside, the air would burn, but the hidrogen will not. But if the incandescence is not related to 316l charged Anomaly we would burn out the air into carbon? This is no good.
              Related Insight: Now to the Facts.
             Ordinary Atmospheric Electronic SPARK turn nitrogen gas into liquid microbubles of Liquid Nitrogen.
             What happens to oxigen and Hidrogen? Fly away? Burn into charcoal?
             (Generally this effect is visible in relation to Oxigen and Hidrogen in anomaly 316l Cell, turning the gas back into water suddenly  IF is not in contact with  nitrogen)
             As implosion is Inside-in We are looking at some Implosion Shielding generated by a Nitrogen Egg-like effect!
             The oxigen and Hidrogen Will not Shield this implosive effect into the Nitrogen in a atmosphere spark.
             Because in a egg of gas, the oxigen and hidrogen will be outside the nitrogen, because is much lighter! (im right?)
            
            But that spark dont affect the oxigen and hidrogen present in air? 
              The ratio of  70% nitrogen make them into   Nitric acid that it generates already have  02. 
            So.... the spark is strong implosion.
        http://www.youtube.com/watch?v=dScqzU7UGHk
    It works just like hho generator, but reverting air into no2 or Nitric Acid.

4 - Another method 
A huge spark would implode the gas, and also the air that come in with nitrogen.
In question is that we could charge even stronger the nitrogen the waaaay up again untill this nitrogen reaches a point that would be very implosive in high speed like oxigen and hidrogen.
This is good. I can control how a Joe-Cell charge the implosion on bubles.
But how make it even stronger than now, up to the point that we can ignore the nitrogen?
This  is not in my experience yet.

Another Conclusion - AC air Charge.

 What is the reverse of spark that turns nitrogen gas into liquid nitrogen?
How turn GAS nitrogen into ENERGY-GAS  or PLASMA nitrogen?

I have one IDEA why taking considerations on WALTER RUSSEL home course that I completed.

As joe-cell being Austenic creates in pure water a kind of Alternating Current.

This AC acts like conducting media, and yet, this water wont short the circuit!
The conductive neutral plates betwen contected plates ACT like connected plates!

That effect is visible inside lamps, that have Tungsten, that is also austenic, but they need take out the air and place vacum.

The carbon arc lamp works well with nitrogem, but is burning on Site (not just turning air into plasma, but also creating the fire)
To create a could plasma in air, would look like a glow bubles as seem in candle in microwave oven, http://www.youtube.com/watch?v=oDrLlQJChZI&feature=related.

 How limit this"burning" to take a Higher voltage, up to electrostatic and, in a outlet lighter, implosive power gas would create a stronge engine without the need to "SHORT" and huge consuption take place.

At the end of this video we can see how carbon buildup makes a better implosion effect in air.
http://www.youtube.com/watch?v=9501V-D-SM4&feature=relmfu

Exist Some Separated Features within the Single Joe-Cell.
Im trying to reach Magnetic Anomalies but we try to understand minnimum details.


1 - His format and Size - is like a Big Capacitor.
Without eletrolite, we have a higher water resistance, and capacitors with resistors is well known- as SuperCapacitors.

Probably we are dealing with some high voltage capacitor.

Such high voltage that, the conductive metal plates stops to conduct properly, and the rubber give huge shock! and big sparks! (effect seem in videos).

2 - Neutral Plates - Residual Charge.
This neutral plates develops a kind of Charge without any connection - by ballance.

In my experiments a neutral 316l bars, between the connected 316l bars  without any connections will develop 2 charges, + and -  in salty water to balance the polarities of conected rods.
In pure water they  act like connected plates in pure water, impressive results!

By the time necessary to charge a cell, we can´t take in consideration the Car Battery, but just the capacitive charge that wont give up.

The "proven by practice" implosive bubles retain some charges while the device is connected or have some capacitance.

What is most fantastic is that, a common  super capacitor would last weeks taking the necessary charges for implosive bubles.
We see that a car battery is allways being recharged., that means the implosive influence of the cell over the conventional "explosion" would turn the cell into a continuous fuel cell.


Experiment:
A tiny cell  like a capacitor. A FLAT capacitor.
The size will not reach 3 inches by 1 inch max.
But the plates will be sufficient to keep charge.

The only charge will be on the Aluminum Dry High voltage flat capacitor that surrounds the flat cell in the center..

The engine will also be flat.
A projet will be made. Is necessary to work into this.

"What can be made BIG can be made Tiny."
"What can be made 3D, can be made FLAT"

Lifter in the game

Now  lets think about the lifter.

The lifter has the same effect of that created by this video
http://www.youtube.com/watch?v=jIL0ze6_GIY
The same logic with some bit of difference when aplyed to this:
http://www.youtube.com/watch?v=SQuoll2Xqkg
Dont use high voltage please, dont make your parents sad with someone killed.

there is a flow of "charged air" back and forth, but this time, instead of positive wire having aluminum, it has cooper.
Also nickel-Cromium wires works once the magnetism is gone with incandescence.

But instead of one free aluminum foil, we got this COOPER WIRE. how magnetic eletric flow happens?
Lets make this and joe-cell one theory.

Lampada Inversa.
Assim compreendo  o que pode ser o fogo grego, ou lampada inversa.

A lampada inversa funciona assim.
Hoje testemunhei sobre espada de luz.
Entendo que o processo é inverso.
Não temos que ter uma lampada de vidro que impede o pavio de ser consumido.
Pelo contrário, temos que ter um metal que deve ser impedido de?

Eu vejo remotamente uma forma de metal que não tem que ter vácuo dentro de um vidro, mas que sim, no lugar do vácuo, luz, e fora, trevas.

gfcgamer 

Neutral Plates - Vibratory Obstacle

As we see now,  in video:

http://www.youtube.com/watch?v=PZb-9y3hbOw&feature=plcp

The obstacle blocks the flow from one side (top, expanded air, water ,matter, solids)to other (space, vacuum,  generated by weight of water into tubes)

Inside a lamp we have the same, A flow of energy that could Burn instanstaneously, is limited by vacuum.

The only particles that can enter in and out find obstacle (glass).

I want to reach something here, dont fraight with wrong details.

The darkness so doesnt sudden destroy the incandescent light metal in a FLASH, but cross trough glasses, the obstacle that generate excitement of the photons inside the lamp, exactly as cup on video above.

1- incandescent metal fire genrate vaccum (attracts dark, expanded matter that swap places with air after the flash, burning oxigen and completing a process.)

2 - The limited by glass, there  is no way to this happen, so there also no oxigen to burn it inside the lamp. As the oxigen can´t cross the glass, what come after the metal is the lightest particles.

As they try to cross the glass inside vacuum, as the vacum sucks the solid cup down puxing water to fill the vacum, the glass saturates in his surface and block the sudden flow of energy, as the cup sometimes is puxed down, even being lighter than water, blocking the flow and doing a single vabration section.

What we see is the finest dark particles transforming into light. Because if metal turn into light, some light must turn into dark. The light so happens, as if we have oil over the water, also we can use noble gases to create colorfull lights inside lamps..

http://www.youtube.com/watch?v=jIL0ze6_GIY

In the Video Above, the charge is answering like the water inside joe cell shows bubles of hidrogen going left and right by such influence.

 But if we could limit this vibration, to take time, crossing under neutral plates that even excite him even more vibrations, there will be a slowdown effec. As we turn off the device it would take some time to finish his now charge.

Explanation on Bubles.

Bubles are basically like this:

As in the lamp:

The oxigen find a vacuum created by a expansion, so the air cannot run against water, in my view, the oxigen and hidrogen ions, cross down and take place pressing down all oxigem and hidrogem in the cell, until some fine hidrogem entering the water, is also released in the point where the vacum was created over the electrode, and oxigem takes place where expansion try to take place. 

If we forcibly expose 316l to the salty water acts like a oxigem medium, where releases the oxide from the metal destroing the cell, and accelerating the short, destroing hho generator properties.

I will set knowledge much more easy to understand soom, but I need this now.

"A OXIGEN  THAT COULD OXIDIZE METAL, BURNING INSTANTANEOUSLY, IS LIMITED BY WATER AS VACUM IN A LAMP."

"ONLY THE FINEST ENERGY COMING OUT OF ELECTROLDES REACH SLWOLY THE ELECTRODES UNDER WATER. (THEY EXPAND OR COMPRESS IN exchanging  PAIRS) 

But estrange, they cannot work in air, but only in pure generated vacum.

The pure water has more vaccum or space, than salty water that have metal oxides or solids that could act as center, burning the bubles, creating a slow burning fire, know as simple hidroxide, where there is no charge at all..

The bubles are for me formed by vacum limiting water that forces a vibration of oxigen and hidrogem particles to let the energy flow out, and so is created by this obstacle like in first video, a vibration that could even generate electricity, as generate bubles that scape from generator.

Im sleeping, Someday I will make myself perfect clear, believe me.

gfcgamer

Ao observar o vídeo:
http://www.youtube.com/watch?v=jIL0ze6_GIY&feature=player_detailpage
Em um dos videos de Joe, ele demonstra como ja experimentei que as bolhas vão da esquerda pra direita.
Elas violentamente viajam esquerda e direita,  e a agua fica "dura".

Entendendo que a agua tem propriedades condutivas devido ao (não magnetismo) do inox 316l, a anomalia unida a alta voltagem de um capacitor cilindrico concentrico propicia este movimento de vai e vem entre o eletrodo abaixo (negativo) e o positivo logo ao lado e nas laterais.

Como no blog anterior o video de que circulos ou hexagonos centrais adicionais fazem que o magnetismo pule.
Podemos entender:

Se a água condutiva sem sais não pode produzir o vai e vem como ocorre com  a bola de alumínio no video acima,  Ou se, a condutividade sendo magnifica ela tem que antes passar por um obstaculo, o que temos?
Eu observo o vai e vem da água passar ou em espiral, ou pulsando, ou como deveria, formando um circuito magnetico.

Se a bola de aluminio ao inves de ser forçada em vai e vem, for forçada a girar com peso, sem perder a sua inércia em movimentos de vai e vem, ele iria criar não só um movimento acelerado, mas iria mante-lo por muito tempo, dependendo do peso que desprendeu e do atrito que provocou.

Na joe-cell não só os cilindros de 316l são super derrapantes, mas também há uma nuvem de bolhas que se formam ao seu redor, e que se a água se reencontrar em um "Figure of 8", ou infinito, ela só vai acelerar até o ponto que nos mostrará auto-sustentavel, uma vez que as placas neutras guardam cargas e ainda geram mais carga se forem incitadas com uma "bobina" de água em movimento de  correntes "marinhas" ao seu redor.

Ah Esta pronto! Motor eletrostático (4000RPM)
http://www.youtube.com/watch?v=kJnrm3ckHIc&feature=related
Agora:
Para aumentar seu potencial, teriamos que girar seu campo magnético em um 8!
Quando vemos estes motores rotacionais não entendemos que o círculo destrói a capacidade
deles se auto-carregarem.

Agora devemos pensar como fazer o FIGURE OF 8, e eu só consigo pensar usando água,
porque como na bateria de Walter Levin, o CRUZAMENTO 8 faz uma espécie de GIRO como a corda de metal de um relógio antigo, que forma eletricidade em resposta ao giro do campo magnético que está no centro,  Mas que cruzando, gera uma solidez que impede o retorno imediato, e este atrito entre as duas fitas de água, cria alta voltagem.

Uma patente de capacitores em figura de 8 os torna não indutivos, e não magneticos, o que prova que de certa forma não perdemos assim a energia elétrica produzida pelo giro em forma magnetica por ser produzido por um movimento em 8.



Projeto:
Se utilizarmos os 4.000 volts e a bolinha de alumínio, teriamos que ser mais versateis:
primeiro que 4.000 volts não pula mais que 1 centímetro.
Um obstaculo normal, criaria o que vemos, um campo magnetico vai e vem Vertical.
Para que o campo vertical se torne um "Figure of 8"
=> Eu vejo uma estrela de 5 pontas.
As linhas entrelaçadas, devem ser capaz de utilizar a energia magnetica como é feito
pelo sr Raphiel Morgado, para que possa até mesmo produzir a propria energia por longo
perído.

http://www.youtube.com/watch?v=_MBYg1NPzMY


Agora observei que: Como a agua é multi-particula se comporta como uma barra entre os dois, ela vai
criar vai e vem de duas formas simultaneamente contra um ao  outro.
Ao tentar eviar uma batida, o que é natural iniciar por isso o conhecido espiral.
Como ela vai encontrar o movimento anterior ao girar, ela vai cruzar a 90 graus, e voltar ao
movimento incial um pouco acima e o outro para baixo.
Estas linhas eletricas então vão expandindo evitando choque e e cria o que conhecimenos pelo nome de "campo magnético".
Mas este campo magnetico se assemelha sim a aquele descrito por joe.
Ela vai pra esquerda, pra direita, pra cima, pra baixo, e fecha circuito como uma bola de 4 aneis.
A medida que ela vai aumentando sua força ela vai formando o que conhecemos por helicoidal.
Os dois X são o cruzamento de duas vias com elas mesmas, buscando novas direções.
Já sabem desmontar, então o helicoidal na verdade, quando mantem vida, tem o formato de figura ativa que gira, formando quase que um "sistema solar" com um grande "sol" em nosso corpo, chamado DNA, ele não se limita a helicoidal quando vivo, mas ele forma um movimento inteligente que vou um dia simular aqui.

gfcgamer



Sobre CLEM ENGINE:
Penso em usar ou se foi usado o proposito acima m CLEM.
Quando falamos de Dr CLEM e seu CLEM engine: Funciona com óleo.
Podemos entender que se houver um movimento como espirais que descem, muito parecido com o vai e vem, so que o vai e vem na joe-cell produz por natureza espirais, mas a água então irá gerar um potencial, e se tornará sólida, formando uma fita envolta do cone, que por sí desce pela gravidade auxiliado pela já gerada força centrifuga.
Ma no caso do chamado cavitation effect, ter ajuda das bolhas de vácuo, ou bolhas que isolam o material das paredes com óleo, sem a força destruidora da água, ocorrerá o movimento ultra economico, como é o do corpo das plantas que bem se sabe, naturalmente não destroi o solo.

Grevennikov e Light-Tuning

Later: English translation

Ao compreender muito melhor Joe-Cell

Observando o Magnetic Vibrator:
http://www.youtube.com/watch?v=KF3fSxRgJLk&feature=g-hist

Este campo não pode ser nocivo. Creio que mataram Greeb.

Segundo observamos esta vibração, notamos com o video que se aproximarmos
dois campos magneticos com angulos levemente diferentes, ocorre o cruzamento uniforme dos campos
que pode converter magnetismo pequeno em grande magnetismo.
Observe se dois exagonos pintados são interpostos.

http://www.youtube.com/watch?v=W-eYOOTLdSQ&feature=plcp
Notavel que na bobina por ser enrolada ela tem um angulo maior ou menor em relação a bobina anterior dependendo do tamanho do cabo, ela aumenta ou diminui o ângulo o que cria esta "fusão de linhas de luz", ou linhas magneticas.
Testado com linhas pretas funciona como uma lente com 50% da potencia de uma lente comum.
(fresnel, e óculos de grau de plastico opaco)

Toda luz é um pulsar, e todo o pulsar pode ser convertido.
O buraco negro e o espaço negro (inverso da luz)  também pulsa. Mas pulsa meio dia pra cima, e meio dia pra baixo, ou milhares de anos pra cima, e milhares anos pra baixo, já a luz solar o faz na velocidade da luz.
Na verdade é sempre expande e contrái a partir do centro, da galaxia, da terra, do átomo.

Regulando o ângulo Greb sintonizava de forma a transformar a luz visual em luz negra ou buraco negro.
Como ve em greb, um bem colocado angulo faz ela expandir e contrair.
A expansão cria magnetismo de forma que atrai ou repele o ima, dependendo da forma e distancia
do cruzamento dos fios magneticos invisiveis do IMA com os trilhos de cobre com AC.

É preciso ter "neutral lines" ou linhas neutras para que este efeito ocorra.
Porque na natureza não tem curto circuito!
O pulsar da luz ocorre não por um curto, mas por uma capacitância. ou Radiação-Gravitação.
Ao usar essas linhas cruzadas podemos sintonizar luz solar e transformala em eletricidade pulsada.
Uma pilha pode a fazer funcionar mas esta deve estar ligada só com um polo. Eu tive sucesso em fazer
uma pilha de rolo de papel alumínio funcionar por dias ultilizando somente de um polo depois que havia sido previamente carregada.

Mas era preciso de um cabo jogado ao chão, e outro ligado nela.
Somente a agua funcionava como transmissora.




Esse pulsar pode ser SINTONIZADO. mas pra isso temos que saber sintoniza-lo.

Como Acumular- Sintonizar:
Usando Transmissão eletrica via ar, ou 316l electrolisis wireless transmission em agua destilada ou pura,
colocamos dois cilindros ou mais cilindros.

Im updating my blog in english because people around the world know this universal language, mainly scientists. ==  Science is universal.
These ideas are based on  experimental tests i´ve made. 

New video sequence on Joe-Cell. Understand that Im trying to undnerstand
http://www.youtube.com/watch?v=AJsYKv8_eY8
Is quite hard to understand british accent, but we need pay attention to this magnetics master.

Im trying to find a way to use HHO generators to pulse water.
Also this opens the way to use the earth frequency pulse. (even visible by sentitives)
to run some kind of Joe-Cell Devices.
Also other devices that can generate anomalyes.


Experimental dispositive - Water Vibration:


1 - Flat Vibrator - is composed of concentric lines in closed shape like circles. + shapes + vibration
Flat vibrator works in AC, that means we need to short AC in the outer shape.
http://www.youtube.com/watch?v=nTn2P9j6iYo


2 - Joe Cell Concentric Austenic ANSI 316l Cilindrical Metal Plates.
Understanding and maybe some experimentation with true working (Stage-1 or more) Joe-Cell Device.
(see it pulsing on the last minutes of this video)
http://www.youtube.com/watch?v=Zihvon92knE

3 - Omasa Gas Generator
Understanding on Omasa Gas generator. Just youtube it to understand.
http://www.youtube.com/watch?v=NUPE0Z9V82E

Steps:

1 -  see this video:
http://www.youtube.com/watch?v=KF3fSxRgJLk
Taking flat-vibration into acount, we can imagine why Joe-Cell so slow pulses so "organic", having only 5-6 cilinders.) it vibrate less when have less concentric rings.


2 - AC Water.
 The water between Joe-Cell plates or any + and - 316l electrodes in waters without any salt, or even tri-desalinizated water acts like conductive medium, without shorting the electrodes power.
Like wireless power transmission but in water instead of in-air.

Here in future, a possible link to the Wireless Transmission using (HV and Vibration) or (HV and 316l)

3 - Omasa and Vibration.
Omasa doesn´t seem to be working with Stainless Steel Austenic ANSI 316l plates. If the plates are ferromagnetic like iron or non austenic metal, or even magnets itself,  only especific vibration would break the limitations of a ordinary electrolisis - as we see in his device and patent.

    A-B-C-D sub-conclusions
   
       A: Fact - The water becomes more conductive. As irons in ordinary electrolisis turns out more magnetic, also the water turns into a kind of a weak magnet inside joe-cell.
       B: Fact - As we see and have been related by many people - Water Pulsates -
     (as 316l plates is very slipery it would vibrate as blood not touching the walls of massive bubles.)
       C:  Massive bubles are created right over the surface of stainless steel 316l plates- maybe it is the only place where almost no magnetism takes place, and  micro or nano buble formations is ultra intense. They brobably scape before, probably becausa a Vibration of water takes place.

4 -  Joe Phenomena and Directional movements
       
        If the chanels of water is thin like that on 6 cilinders Joe-Cell, It would:
       A-B-C known possibilities.
                A: If the movements are not well limited by neutral material spacers along the circle, the water                  will act as engine turning around the axis.  The video is not online available right now, only in my records.
                B: If the movements are limited  by neutral material in some especific way, the water will pulse up and down as we see in video above.
                C: Especific limitation of water movement would be necessary for a anomaly water generator we could achieve with well made Joe-Cell device that originally would work later without batteries.
In his old video he teaches about the water buble movement.

My Sub Conclusion:
I believe we can achieve a circulation in figure of 8 that would generate a know kind of electrostatic field generator made in water, just like that one generated like by Water Battery.
Water Battery by Walter Levin MIT Classes.
http://www.youtube.com/watch?v=oY1eyLEo8_A

5 - Nitrogen turn implosive force into nothing.
Nitrogen is villain in joe cell device. The fire in contact with air nitrogen (70% our brething air) wont ever blow or take flame.

6 - While connected to some electrical source without magnetism, the gas is plasmatic blue and IMPLOSIVE turning gas instantaneously into water at the ratio of 1850-1, Generating vacuum.

If the gas is stored for a while wihtout electrical conections, capacitance or battery, it will be a slowly  danger explosive flamable gas - faster yet than pure nitrogem and much harder to control.


6 - Construction of testing device. Me and You.
Im building 2 experiments that would help me a bit.

As I dont know if the magnetic vibration of field between cilinders will be different.
but a easy test would be to create first a simple one made of cilinder top or just 316l wire.

If many wires 2 wire coils made of 316l  rigns of many diammeters on the botton of the water would create a  magnetic field in water that some magnetic plate would go up and down like the first video above, but just underwater means:

MEANS  that an simmilar implosive energy could be made out of air without nitrogen (contact with air or nitrogen would made implosion superflous )
But as we cannot create a spark, or the implosive gas, of course would implode BEFORE it accumulates.
Means that we would see a tiny blue-yellow or blue-pink spark, but no implosion at all.
For this work the air must act like AC power conductor, what we could achieve with Joule Thief and SEC devices.
As Joule Thief and
http://www.youtube.com/watch?v=NFowJ-SqEi8
 SEC exciter (using thin Air or Glass wireless transmission on electrolisis here)
http://www.youtube.com/watch?v=7EGtu9AtdcE

They pulse the magnetism in a single Ferrite, almost like turning into a pulsating AC.
If this is related to water electricity transmission and just like Joe Cell, the device generates up to 70% more
gas on the same charge, just because it doesn´t short the wires using pure H2O without any eletrolite.

to continue...

gfcgamer 02/10/2012 Amateur Researcher, Brasil.



a bit offtopic: Personal Related to explanation on how coils work at.
http://www.youtube.com/watch?v=RiiIU6vmWZY&feature=plcp

gfcgamer non cement aluminum foil cell.

I have developed my own variation of cement cell.
After years I have found a old cell was still working.
This is called simply gfcgamer´s aluminum cristal cell:

For this kind of cell specific I use:
A cheap aluminum tube used in kitchen to keep aliments.
A tiny tube, or electrode of 316L Austenic Inox.
A source of power, can be 12V, 1 amp from cheap multi-voltage power souce.
Works well.
You will need a extra foil for create some capacitance.
If you can, take some strong neodimium for experimenting with water circulation.

1 - Put the electrode inside the cheap aluminum foil tube, loosy, dont worry just dont let touch the any outer aluminum foil, but it can touch well the inner paper tube if is not to much aluminum salt in there.
2 - Take out 60cm foil aluminum for later aluminum cell.
3 - Place 3 or more simple foil  around the aluminum tube  and cover it with the aluminum above.
4 - immerse the rest (almost 7 metters) aluminum tube inside, underwater It will float a bit in the begin.
5 - let it run for some minutes, with with any source of power from 12 volt to 30 volt or more,
 the positive (oxidizer or anode) in the 316l electrode and the negative on outermost foil.

6 - Experimental Step -  If you have neodimium use as much possible around the aluminum tube generator. this will create a circulating water spiral all around the neodimium, inside the aluminun foils that have acumulated some aluminum salt. But this is step is not obrigatory for this case, but much experimental

7 - Now running for a while, we can turn the positive back to 316l, and change now the outside water where it have been imersed.

8 - Let it run like that for 1 hour.

Check the voltage today, and the day after. You will see a 1,5 to almost 3 volts and it will continue produce a tiny bit gas even after turned off.
If you want a huge effect.
 - Choose a place where the water umidify, it can be even tiles from badron, but let the water fall around them to go underground.
As this salt is going underground, let a cotton tread soaking the ground just a bit.
After some hours the water will flow all down, now take the negative and put on the ground just under the cell.
Let the tiny cotton tread keeping the ground moist.
This will make a huge electrode of underground earth. Cement ground is the best yet.
Let the positive on the cell, and ground the negative in the cotton tread.

I think the cell wil generate from 1.5 volt to much more if well water grounded.
Sometime before I remenber he was generating so much voltage that was bubling intensively.
That time I was without voltage mesure device.
You will not that the aluminum will have holes all the way. this means, we have somethign happening there!

Eu quero um UFO (FOO FIGHTER)

Atenção Aceito doaçoes de Foo Fighters para o combate ao crime no Brasil!
Heli-Copters é o bicho mais idiota que já colocaram em guerra!
Vá em http:\\jnaudin.free.fr
e veja como podem fazer uma nave segura e descente para o combate ao crime no Brasil!

Quando uma bolha sobe, ela movimentará o pó de 316l que na água se torna magnético.

1- O magnetsimo girando, gerá eletricidade.
isso basicamente será muito interessante.

2 - o magnetismo do 316l em flocos em água irá formar hho, cair ao centro neutro
     e retornar ao fundo. isso ficará assim. e ao centro esses flocos cairão e colapsarão.

3 - Uma massa de 316l magnetica gira quando é interrompida por uma bolha.
Isso faz com que ela gire.
Quando ela gira algo fantastico acontece.

4 -  O incrivel video de anti-gravidade foi passado, e o compreendimento deste donut energy está mais
incrivel do que nunca.

5 -  Agora vou perguntar ao andrei (amanhã ou depois) como que faço para conseguir criar flocos deste metal tão precisos.

6 - Os ovos são um exemplo incrivel de uma massa mais solida dentro de outra menos.
Assim, imagino que devido ao magnetismo o 316l em flocos iria se aglomerar como um ovo na água.
ele iria assim descer até o fundo onde: ele iria gerar 316l.
Subindo ele chegará a um ponto onde uma alta voltagem irá colapsar as bolhas que fez ele subir, e ele cairá novamente.
uma grande quantidade destes irá criar uma super circulação sosinha.
agora veja bem: podemos criar um liquido com seu coloide.
Isso que devemos estudar melhor mais tarde e criar esse super metal
  

Resumo Twitter.

Vou fazer resumo de todas postagem twitter em blogger.
O meu Blogger é o melhor lugar para relatar minhas ideias.
Vou usar o twetter junto dele para indicar minhas ações.

Eu agora estou em uma marcha para encontrar aquele sentimento que perdí, daquela vez.

Este sentimento fala ao meu ouvido sempre:
O desenho que assistiu, não é irreal, e, vendo por esse ângulo, eu extendo ainda mais:
Esses personagems de que gosta, a situação, e o mundo perfeito de que quer, é tão real quanto aqui.
Os personagems, em forma, podem nunca existir aqui, mas sem dúvida existem alí, e você pode viver eles dentro de sí, e viver aqui, uma vida de "dar inveja" a eles.
Sim.
Mudar os céus da cidade, fazer bolhas de ar explidir, saber entre poucos, da realidade do mundo celestial, que na infancia era uma mera fantasia em um desenho chamado "Shurato", assim como os poderes que vemos no desenho "Ramayana" que escapam os olhos dos que hoje, "já viram de tudo".

Mas viver uma vida mais bela do que o melhor filme ou desenho que já viu, é jamais deixar de acreditar em sí. E eu infelizmente, nestes ultimos tempos, tenho desacreditado, levado pelo desejo de arrumar as coisas, ao invés de obedecer o coração.

Sim. Crer, é a palavra que uso, ainda que incerta, não vou perder tempo com vocabulário agora.

Ao obervar naquele momento em que havia coisas que sempre sonhei, como paz, confiança, conforto, beleza.

Àté parece ne? poderes magicos? Confiança? Amizades verdadeiras? Sorte infinita?

Foi neste momento que me decidi. Dane-se essa minha maldita realidade!

Olhem bem!
Independende de parecer idiota dizer isso, voçes já escaparam algum dia destes problemas que criaram e se metaram a acreditar quando se tornaram "grandinhos"?

Acham mesmo que arrumando as contas no banco, as coisas na vida irão se acertar?
Acha que porque digo isso é um sacrilégio e motivo para deixar de "sustentar a familia"?

E você guilherme, achava que programação iria te dar o que queria, foi quando me livrei deste desejo que conseguí ver o que os olhos impuros queimam ao enxergar.

É como se você encaixasse no centro solar do planeta terra, e nenhuma sombra mais chega proximo ao teu ser.

Não há como lembrar direito, porque eu vou dizer isso!

A vida passou como eternidade que já não sei dizer se foram mezes ou dias, e além do mais, não vale a pena ir lá, porque não chegara, afinal, Não Foi o que conhecemos por REAL.

Ou seja isso não aconteceu! Mas se minha memória não falha. Eu podia presenciar de cima toda a minha vida como se tivesse sido um sonho.

Cuidado com o que quer, o grande mistério talvez é que na veradade estamos buscando a estrela errada.
Quando apontamos para a rua infinita na sua gloriosa estrada de outro, eles apontam para de bronze que termina na esquina em um precipício e dizem: Deve se preocupar com o seu futuro!

A vida e bela? => a que é belo é vida.

Dizem:
A vida não é um mar de rosas.

Eu não acredito nisso!

Afinal, quando acreditamos que a vida é um mar de rosas?
Não é quando somos criança?
Portanto não significa que a criança esteja errada...

Que pretensão a nossa achar que ela é boba, e que temos mais verdade que uma criança, mesmo depois de perder boa parte da esperança que temos.
Coisas que sentíamos ao contemplar a claríssima luz do sol entrando de manhã pela janela, tocando nosso cobertor.

A morte não ocorre quando abandonamos o corpo, mas pouco a pouco, quando somos agredidos por "fora" e "por dentro" construimos por nossas próprias tristesas , dores e outras sombras que incentivam tudo a parar e cessar o movimento vai consumindo nossa crença de um mundo perfeito, ou nossa vida, motivo da força incrível que nos faz nascer e crescer...

Quero envelhecer bem, com minhas proprias mãos cosntruindo um mundo perfeito do qual desde já quero voltar a acreditar, e bem velhinho, ou já do outro lado contemplar as flores que cultivadas no canteiro do viver.

Essa contemplação das coisas boas fará nascer de novo olhos brilhantes, construirá luz onde as sobras na vida passada haviam tomado conta, e como um grande respiro, se preparará novamenta para mais uma longa jornada de vida.